Air removal · equipment
Juice Vacuum Deaerator
Address a demonstrated air or dissolved-gas problem.
Juice at a stated temperature, gas condition and flow.
View details →Juice Thermal Processing System
Match a validated product-and-package process to the liquid duty.
Thermal treatment
- Incoming material
- Juice or formulated product with declared particles, viscosity and temperature.
- Required output
- Product transferred under the conditions defined by its validated process.
Machine structure and working path
The skid image shows heat-exchange modules, product piping, pump, holding path and control cabinet. Heating, holding and cooling duties must be specified separately from a validated time-temperature process for the actual juice and pack.
Tubular heating and cooling
The tubular configuration combines controlled heating, a holding section and cooling for liquid juice and beverage duties. Hot water or steam supplies the heating side; cold water or chilled water supplies cooling. Product-contact parts are available in SUS304 or SUS316L, with PLC control and a CIP cleaning arrangement.
Configurable process window
The tubular equipment family lists an adjustable 72–150°C temperature range and a 15–120 second holding-time range. These are configuration references, not a treatment recipe. Actual temperature, holding-tube volume and controlled flow must be selected together for the product, package and storage conditions.
Acceptance
Specify controlled flow, critical instruments, diversion or response to off-condition operation, records and the filler interface. Include startup, shutdown and cleaning in the offered operating scope.
Configuration and operating basis
- Heat-exchanger family
- Tubular configuration; product path selected for viscosity, fouling and particles
- Temperature configuration
- 72–150°C adjustable family reference; final process must be validated
- Holding-time configuration
- 15–120 seconds family reference; holding section and flow sized together
- Heating / cooling media
- Hot water or steam / cold water or chilled water
- Contact material
- SUS304 or SUS316L, selected for the product and cleaning conditions
- Control / cleaning
- PLC automatic control and CIP cleaning
- Processing capacity
- Project-specific juice flow; no rated flow is assigned to the display image
Inspection and maintenance
Provide safe heat/pressure isolation, cleanability evidence and maintained/calibrated critical instruments.
The equipment duty is not a product-specific preservation validation or shelf-life guarantee.
The quotation sets out the selected configuration, contact materials, tested duty basis, utilities, equipment interfaces and supply scope.
Check integration with existing equipment →Related equipment systems
See how this machine connects with the surrounding process.
Purchase questions
What capacity should I provide?
State the material and units: raw-fruit kg/h, extracted juice L/h or finished-product kg/h. Include operating hours, cleaning and campaign changes separately. These rates cannot be treated as interchangeable.
Are the displayed images supplied-model evidence?
Equipment images show machine families, not a fixed bill of materials or a verified customer installation. Schematic images mark duties for which no model photograph is shown. The quotation identifies the selected configuration and supply scope.
How does an enquiry reach the team?
The protected form validates your choices and spam-verification result. A service acceptance reference means the receiving service accepted the request; it is not proof of final inbox receipt or a quotation. Keep the reference if delivery is uncertain.
Adjacent duties and interfaces
Filling interface · equipment
Aseptic Bag-in-Drum Filler
Match the product path and treatment boundary to the selected pack.
Accepted juice or formulated product under defined transfer conditions.
View details →